用Maya创建复杂的曲线教程

　　OK First, we're gonna fix no 1 connection area, zoom to this no 1 area, select this CV (fig 34), drag it to the bottom a little bit (following original curve) (fig 35)

　　在修正这些区域之前，我们必须知道我们还有最初未连接的曲线，这些未连接的曲线将做为我们修正这些区域的参照.

　　我们现在修正 1 号区域, 将这一区域放大显示, 选择这个CV点(fig 34),将它向下拉一点(以未连接的曲线为参照)(fig 35)

　　Now select this curve (fig 36), drag it to the top near the previous curve (fig 37)

　　然后选择这一CV点(fig 36),并将其向上拉靠近另一CV点(fig 37)

　　Extremely warning while moving : Do not until touching the previous curve and do not overlapped previous curve, if you do this, then you will have crossed CVs, with crossed CVs you will have very bad extrusion, bevel, loft, and other curve surfaces, and with crossed CVs you'll be always have error messages while filleting objects, etc...so don't mess with this crossed CVs guy...baaad result eh..o_0