show controller e1(带注释)
http://tech.ddvip.com 2007年09月03日 社区交流 收藏本文
内容摘要：在路由器配置E1和CE1过程中，我们遇见线路问题的时候会常常会使用show controller e1命令，下面就是show controller e1的详解，希望对各位有些帮助。在说明show controller e1命令后面附上cisco解决E1和CE1故障的流程图！
7026#show controller e1
E1 5/1 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (648 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
2600#show controller e1
E1 1/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
Data in current interval (457 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 25 15 minute intervals):
1123 Line Code Violations, 53 Path Code Violations,
2 Slip Secs, 708 Fr Loss Secs, 25 Line Err Secs, 0 Degraded Mins,
1 Errored Secs, 0 Bursty Err Secs, 2 Severely Err Secs, 709 Unavail Secs
责编：豆豆技术应用