OSPF案例分析之如何得到正常的OSPF路由

　　FastEthernet0/0 is up, line protocol is up

　　Internet Address 222.222.222.1/24, Area 0

　　Process ID 22, Router ID 197.7.1.2, Network Type BROADCAST, Cost: 200

　　Transmit Delay is 1 sec, State DR, Priority 1

　　Designated Router (ID) 197.7.1.2, Interface address 222.222.222.1

　　No backup designated router on this network

　　Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5

　　oob-resync timeout 40

　　Hello due in 00:00:07

　　Index 2/2, flood queue length 0

　　Next 0x0(0)/0x0(0)

　　Last flood scan length is 0, maximum is 0

　　Last flood scan time is 0 msec, maximum is 0 msec

　　Neighbor Count is 0, Adjacent neighbor count is 0

　　Suppress hello for 0 neighbor(s)

　　Serial1/0 is up, line protocol is up

　　Internet Address 100.1.0.2/16, Area 0

　　Process ID 22, Router ID 197.7.1.2, Network Type NON_BROADCAST, Cost: 200

　　Transmit Delay is 1 sec, State DR, Priority 1

　　Designated Router (ID) 197.7.1.2, Interface address 100.1.0.2

　　Backup Designated router (ID) 197.7.1.1, Interface address 100.1.0.1

　　Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5

　　oob-resync timeout 120

　　Hello due in 00:00:17

　　Index 1/1, flood queue length 0

　　Next 0x0(0)/0x0(0)

　　Last flood scan length is 1, maximum is 1

　　Last flood scan time is 0 msec, maximum is 0 msec